Faded trims? Want to keep trims looking new? Then look no further. The Aqueous Guard Regenerate Ceramic Coating Kit will bring trims back to new and protect them from degrading!
Key Features:
- Ideal for tired looking trims or to help new trims stay new.
- Simple prep, wipe on and buff off application.
- Makes cleaning super easy due to the smooth finish.
- Prevents contaminants from binding to the surface.
- Forms a covalent bond giving a highly durable finish.
- Hydrophobic and oleophobic (repels water and oil).
- Protection against UV, Acid Rain, Bird Lime, Exhaust Staining, Dirt & Contaminants.
- One 30ml bottle of Regenerate will achieve 4 to 5 car uses
Kit Includes:
- Regenerate ceramic 30ml
- Microfibre cloths x 2
- Prep Fluid 150ml
- Microfibre applicator pads x 1
- Pair of latex gloves
Directions for use:
1. Ensure the surface has been properly cleaned and dried, and free from any contaminants.
2. Degrease the surface using the Prep Fluid and microfibre cloths.
3. Add a few drops of Regenerate to the applicator pad.
4. Working on one panel at a time, apply evenly in a cross hatch method (horizontally, then vertically), ensuring a full even coverage.
5. Allow approximately 1-2 minutes for the coating to dwell.
6. Gently buff off the excess using a clean microfibre cloth.
7. Take a second clean microfibre cloth and gently buff until a clear, rainbow and smear free finished is achieved (the key here is to not buff too hard but simply to remove any signs of rainbow and/or smears only).
Allow to sit for a minimum of 2 hours in the appropriate conditions before the vehicle is driven again. Ideal curing is 24 hours if practical.
NOTE: Do not apply in direct sunlight, rain, high winds, temperatures below 5°c or above 40°c.
If any product is accidentally applied to an area you have not meant to, immediately buff off with a clean dry microfibre cloth.
RECYCLING:
Our plastic bottles are made from PET plastic which is completely recyclable, and is the most recycled plastic in the world.